55 Engineering Professional jobs in Australia

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Field Engineer
L3Harris Communication Systems Australia
Watsonia, Melbourne
Under the L3Harris Communications Australia Global Field Services Team, the Specialist Field Engineer will work within the existing Mature Support Contract to the Commonwealth of Australia. This team is responsible for supporting the contract requirements for the provision of:
· training design, delivery and evaluation,
· maintenance support,
· software upgrade services,
· engineering support services,
· equipment installation services,
· equipment operation and support services, and
· planning and advice support.
The Specialist Field Engineer will be required to work as part of a team or as an individual to engage with the Commonwealth of Australian product end users and L3Harris Engineers, Sales Specialists, Program Managers and Account Managers. Based in Melbourne, Australia, with extensive domestic travel.
Responsibilities:
+ Provide field and office based technical support of RF Communications tactical radio equipment in the HF, VHF, UHF and SHF RF spectrum.
+ Provide guidance and training to customers in establishing operation, maintenance and inspection procedures and techniques.
+ Provide effective solutions and operational quality of system equipment .
+ Provides pre-sales or post-sale technical support of company products and systems.
+ Provide, present and interpret design, application and service information to sales staff and customers.
+ Support the design of minor systems to satisfy customer needs.
+ Assess and analyzes technical application of company products and competing equipment to meet customer needs.
+ Conduct the install, configure, operate, maintain, repair or modify customer equipment or software.
+ Analyze and troubleshoots equipment failures to determine cause and recommends and/or performs corrective action .
Qualifications and Skills:
+ Certificate IV in Training and Assessment (TAE) or equivalent.
+ Military Communications experience essential.
+ Field engineering experience with tactical radio equipment including training, operation, fault finding and basic maintenance of military communications equipment.
+ Bachelor's Degree and prior relevant experience.
+ In lieu of a degree, extensive related experience.
+ Proven written and oral communication skills to provide reports and briefings to the customer.
Position Requirements:
+ Ability to be granted access to Commonwealth of Australia Defence facilities.
+ This position may require the ability to work independently over extended periods at isolated locations.
+ Experience in the operation and configuration of military tactical communication systems.
+ Experience in the troubleshooting of military tactical communication systems.
+ Experience in the use and operation of Battle Management Systems.
+ Must be physically able to move up to 20 kgs .
Conditions:
+ Requirement to conduct extensive travel in support of Australian domestic and international tasks.
+ Requirement to work reasonable overtime as required to support customer and business requirements.
+ Weekend or after hours travel required in order to meet customer requirements.
+ Field Service Premiums provided for tasks excess of 31 days.
+ Hardship allowance in accordance with international policy.
+ Relocation assistance.
About us
L3Harris Australia excels as a prime defence contractor, providing integrated tech solutions for over four decades. Specialising in technology that connects and shapes operations spanning multiple domains: space, air, land, sea, cyber and first responders. Today, we employ over 500 professionals in all major cities who understand the region's unique requirements.
L3Harris Communication Systems is a world leader in ground tactical and airborne mission communication solutions and a global provider of ground based C4 systems and transportable SATCOM terminals. We are focused on delivering advanced systems to meet the needs of our customers, uniting multiple forms of communication together, and covering communication over air, ground, sea, and space.
A few of our employee benefits are:
+ An additional week of leave per annum plus the option to buy or sell up to 2 weeks additional annual leave.
+ Flexible working hours and hybrid working where possible
+ Flexible annual leave (buy & sell up to 2 weeks)
+ Salary continuance insurance (SCI pays 75% of your base salary and bonus for up to2 years)
+ Discounted private health insurance
+ Life & Total Permanent Disability Cover
+ Novated Car Leasing
Important to know
Due to the nature of our work many our roles require an Australian nationality and the ability to obtain a security clearance. Applicants who accept a conditional offer of employment must meet eligibility.
Eligibility and clearance process information can be found at;
respectfully requests no agency submissions at this time.
As an equal opportunities employer, L3Harris is committed to the equal treatment of all current and prospective employees and does not condone discrimination on the basis of age, disability, sex, sexual orientation, pregnancy and maternity, race or ethnicity, religion or belief, gender identity, or marriage and civil partnership.
L3Harris Technologies is proud to be an Affirmative Action/Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

**Requisition ID: 284547**
+ **Relocation Authorized: National/International - Camp**
+ **Telework Type: Full-Time Office/Project**
+ **Work Location: Karratha WA**
# Extraordinary teams building inspiring projects:
Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world's infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place.
Differentiated by the quality of our people and our relentless drive to deliver the most successful outcomes, we align our capabilities to our customers' objectives to create a lasting positive impact. We serve the infrastructure; Nuclear, Security & Environmental; Energy; Mining & Metals, and the Manufacturing and Technology markets. Our services span from initial planning and investment, through start-up and operations.
Core to Bechtel is our Vision, Values and Commitments . They are what we believe, what customers can expect, and how we deliver. Learn more about our extraordinary teams building inspiring projects in our Impact Report .
# Project Overview:
Pluto Train 2 is the expansion of a second LNG train at the existing Pluto LNG onshore facility near Karratha in Western Australia run by Woodside Energy. Pluto Train 2 will process Scarborough gas and have an LNG capacity of ~5 million tonnes per annum. As part of the construction of Pluto Train 2, additional domestic gas infrastructure will be installed to increase capacity to ~225 Terajoules per day. Woodside Energy has selected Bechtel to deliver the Engineering, Procurement, Construction and Commissioning scope of work for Pluto Train 2. Woodside Energy is Australia's leading natural gas producer, and Bechtel is excited to be working with this key customer to help meet the increasing global demand for LNG as a transitional energy source.
# Job Summary:
In this role, you will provide project field engineering specialization and expertise with work planning and packaging, material management, quantity verification and validation, safety and quality control, technical inspection and testing knowledge, and subcontract coordination. Your recommendations will ensure field engineering activities operate safely, are complete, and conform to quality standards and project requirements. The primary responsibilities of this role are Telecommunications type systems Telecommunications LAN & WAN & Telephony, Plant Radio systems, CCTV, Access Control, General Alarm systems, associated fibre optic and copper-based structured cabling, coaxial cabling systems, etc. You will also need to provide support to the wider electrical field engineering team, as and when required, providing coverage during R&Rs.
# Major Responsibilities:
+ Prepares construction drawings and sketches.
+ Leads preparation of construction drawings and schedules and the design of temporary construction facilities and ensures preparation of "as built" drawings and other job plans.
+ Prepare, review, and approve work packages. Implement Bechtel's SWPPs, project specifications and procedures, applicable codes, and drawings to ensure that construction installation requirements are met.
+ Perform in progress and final quality and completeness inspections of Electrical and Telecommunications installation.
+ Develop punch lists and monitor completion of punch items.
+ Prepare and disposition Request for Information (RFI's), Field Change Documents (FCD's) and Non-Conformance Reports (NCRs). Collaborate with design engineering through to final disposition.
+ Coordinate with engineering to resolve E&I design and constructability issues. Resolve and close out of vendor and Modyard carryover works, NCRs and necessary documentations.
+ Provide technical assistance to superintendents, supervisors, and craft professionals. Material Management Initiates requisitions for field purchases.
+ Prepares quantity takeoffs of field purchased material and equipment. Reviews material receiving reports and performs material receiving inspections.
+ Quantities Verifies commodities on quantity tracking systems or other computer database systems as required.
+ Reporting on daily and weekly installed quantities to Project Controls. Safety / Quality Control Ensures zero accident philosophy and requirements are implemented and adhered to by craft and others when in the operational area, and tools and equipment are in safe condition and operated safely.
+ Perform quality control inspections and manage associated Inspection and Test Records (ITRs). Ensure completed work packages and ITRs are submitted to Turnover.
+ Technical Proactively considers continuous learning or shows interest to pursue appropriate learning activities
# Education and Experience Requirements:
+ Bachelor's degree in electrical engineering.
+ Requires 8 to 10 years of relevant work experience as a Telecommunications Specialist.
+ Working knowledge and experience of related Telecomms systems standards and regulations IEEE802 family of communications standards, IEC Telecommunications standards, AS/NZS standards, AS/ACIF S008 & S009.
# Required Knowledge, Skills, and Abilities:
+ Oil & Gas or LNG Project construction experience assigned as a Telecoms Field Engineer Direct Hire
+ Experience, preferably in a lump-sum environment.
+ Understanding of applicable Bechtel work processes including Standard Work Process Procedures.
+ Familiarity with Bechtel Standard Applications (BSAPs), including Setroute, TEAMWorks, Aconex, DSCS, and Unifier.
+ Understanding of Electrical Equipment Hazardous Areas (EEHA) and related Australian Standards.
+ Excellent problem-solving ability.
Working Rights in Australia without employer sponsorship are required.
We are a 2024 Circle Back Initiative Employer & commit to respond to every applicant.
# Additional Information:
This position has responsibilities that include exposure to changing environmental, construction, and operational conditions, which may include: extensive walking in and around an active construction and/or operations site, climbing ladders, working at heights from work platforms including scaffolding, and mobile elevating work platforms (MEWPs), use of personal fall arrest equipment, walking and working on uneven surfaces, working in constricted and/or confined spaces, variable work shifts (e.g., day, night, weekends, 1st, 2nd, 3rd shift, etc.), and work in inclement weather. Some lifting may be required. Candidate must be able to use standard issued Personal Protection Equipment (PPE) required for each assigned task (i.e. respirator, harness, life vest, hearing protection, etc.).
The Pluto Train 2 Project is a Major Hazard Facility meaning this is a non-smoking site and no tobacco products i.e. cigarettes, vapes, lighters, tobacco - are permitted to be brought to the site.
**_This position is available to both local and non-local personnel. For non-locals (FIFO/DIDO), the working roster is 3/1._**
# Total Rewards/Benefits:
There are many reasons why choosing to join Bechtel is one of the best career decisions you will ever make. In addition to working with talented, dedicated people and having the opportunity to play an integral role in stimulating and challenging local and international projects, Bechtel is committed to offering you the benefits and resources to live a healthy life.
With a market aligned salary package and annual discretionary performance bonus scheme in place, employee wellbeing is also at the centre of our business - promoted through our strong health and safety focus and private health cover including access to a leading employee assistance program.
# Diverse teams build the extraordinary:
As a global company, Bechtel has long been home to a vibrant multitude of nationalities, cultures, ethnicities, and life experiences. This diversity has made us a more trusted partner, more effective problem solvers and innovators, and a more attractive destination for leading talent.We are committed to being a company where every colleague feels that they belong-where colleagues feel part of "One Team," respected and rewarded for what they bring, supported in pursuing their goals, invested in our values and purpose, and treated equitably. Click here to learn more about the people who power our legacy.
**#LI-JC1**
**_Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to_** ** **

**Requisition ID: 285985**
+ **Relocation Authorized: None**
+ **Telework Type: Full-Time Office/Project**
+ **Work Location: Brisbane, QLD**
# Extraordinary teams building inspiring projects:
Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world's infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place.
Differentiated by the quality of our people and our relentless drive to deliver the most successful outcomes, we align our capabilities to our customers' objectives to create a lasting positive impact. We serve the Infrastructure; Nuclear, Security & Environmental; Energy; Mining & Metals, and the Manufacturing and Technology markets. Our services span from initial planning and investment, through start-up and operations.
Core to Bechtel is our Vision, Values and Commitments. They are what we believe, what customers can expect, and how we deliver. Learn more about our extraordinary teams building inspiring projects in our Impact Report.
# Company Overview:
Bechtel Mining and Metals offers engineering, procurement, and construction services for customers in the mining sector across multiple commodities including Iron Ore, Bauxite, Alumina, Aluminium, Copper, Gold, Coal, Lithium and Rare Earths markets.
The M&M global business unit also has offices in Brisbane, Perth and Adelaide in Australia along with execution units in the United States, Peru, Kingdom of Saudi Arabia, India and other project locations around the world.
# Project Overview:
The Project is a greenfield mining, process, material handling and ship loading project with a focus on sustaining production, minimise environmental impacts, strengthen long-term relationships with neighbouring communities and foster local economic development.
# Job Summay:
The Construction Lead Civil Field Engineer is responsible for activities relating to construction engineering within the civil discipline. Duties include interpreting civil design drawings and specifications for execution of civil works, such as excavation and backfill operations, concrete installation, field verification of materials, and technical direction to field civil personnel as required. This position is not considered the design authority for the project, but only to enforce civil construction per design.
# Major Responsibilities:
+ Coordinate with engineering on constructability and design issues relating to the civil discipline such as excavation and backfill operations and concrete installation.
+ Establish a civil design/field engineering working relationship and lines of communication with the Project Engineer, including agreement on civil engineering deliverables and overall construction application configuration management.
+ Responsible for quantity take-off, control, tracking, reporting and forecasting for civil discipline.
+ Specify the civil criteria for construction of temporary construction facilities as required.
+ Direct the preparation of requisitions for field procured materials, material substitution, services and equipment such as concrete and formwork.
+ Approve field requisitions as delegated by the Project Field Engineer.
+ Review material receiving reports and warehousing to assure delivery of correct civil materials.
+ Coordinate and monitor the interfaces for civil data exchange to support the construction automation plan and the project controls program requirements at the jobsite.
+ Develop and manage the civil construction quality program.
+ Direct preparation of cost estimates for civil construction activities and coordinate the preparation of cost reports, forecast and progress reports.
+ Coordinate with Field Supervision and Subcontractors to plan/support construction schedules.
+ Plan and recommend civil procedures to be implemented by Field Supervision to ensure construction operations are within requirements of engineering design and specifications.
+ Work with customer's resident engineering and operating personnel to coordinate civil construction activities.
+ Coordinate subcontract activities to ensure civil materials, equipment and quality comply with design plans and specifications.
+ Implement controls over variables affecting civil job progress such as excavation and backfill, dewatering, soil compaction and testing, and mass concrete placement. Also ensure engineering and procurement provide timely delivery of drawings, materials and equipment and that other corporate programs are fully utilized.
+ Administer major subcontract changes regarding the civil discipline and represent the company in major contractual discussions and negotiations.
+ Perform other duties as required by Bechtel management.
+ Validate and submit (discipline) construction quantities for Quantity Unit Rate Report (QURR) tracking.
+ Interface with Project Controls for submittal of quantities to ePCWorks.
# Education and Experience Requirements:
+ Bachelor's degree in engineering or other relevant technical discipline from an accredited university as well as a minimum of six years relevant work experience, or 12 years relevant experience in the absence of a degree.
+ Have working knowledge of construction surveying, excavation and backfill operations, and concrete installation.
+ Demonstrated commitment to Environment, Safety and Health (ES&H). Demonstrated commitment to a Zero Accident safety program.
+ Must be computer-literate in word processing, spreadsheet and database applications.
+ Must be familiar with current industry quality standards.
# Required Knowledge and Skills:
+ Basic ability to utilize the TeamWorks automation suite as the Bechtel Standard Application Programs (BSAPs).
+ Basic knowledge of Project Technical Requests (PTR) for routing and resolving Requests for Information (RFIs), Field Change Documents (FCDs), and Non-Conformance/Compliance Reports (NCRs) between project sites, contractors, clients, and home office.
+ Basic knowledge of work packaging and basic ability to manipulate completions module and PunchWorks for interface with the start-up team.
+ Intermediate understanding of production management including scheduling.
+ Strong interpersonal and teamwork skills.
+ Intermediate knowledge of cost management including estimating and forecast development.
+ Previous supervisory experience within civil discipline.
# Total Rewards/Benefits:
For decades, Bechtel has worked to inspire the next generation of employees and beyond! Because our teams face some of the world's toughest challenges, we offer robust benefits to ensure our people thrive. Whether it is advancing careers, delivering programs to enhance our culture, or providing time to recharge, Bechtel has the benefits to build a legacy of sustainable growth. Learn more at Bechtel Total Rewards
# Diverse teams build the extraordinary:
As a global company, Bechtel has long been home to a vibrant multitude of nationalities, cultures, ethnicities, and life experiences. This diversity has made us a more trusted partner, more effective problem solvers and innovators, and a more attractive destination for leading talent.
We are committed to being a company where every colleague feels that they belong-where colleagues feel part of "One Team," respected and rewarded for what they bring, supported in pursuing their goals, invested in our values and purpose, and treated equitably. Click here to learn more about the people who power our legacy.
**_Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to_** ** **

**Job Description Summary**
The Field Service Engineer is responsible for developing and maintaining strong relationships with both internal and external customers while driving customer satisfaction through Service Excellence. Installing and maintaining electronic medical equipment across imaging modalities across Western Australia.
This role has a multi-modality focus including Radiopharmacy (RP), CT, Molecular Imaging (MI) and Xray
**Job Description**
**Essential Responsibilities**
+ Install equipment in a high quality, professional manner with strong attention to detail in accordance with the company standards, compliance standards and customer requirements.
+ 2+ years previous experience working with Cyclotron and/or Medical Diagnostic Imaging products, or relevant equivalent industry experience
+ Perform preventative maintenance in accordance with company standards, compliance standards and customer requirements.
+ Make corrective repair calls in a timely manner, aligned with customer contract requirements and repair the equipment in accordance with company standards and directives and customer requirements.
+ Ensure timely completion of Field Modification Instructions (FMI's).
+ Advise management when response time objectives cannot be met i.e. If there are two site visits in relation to the same problem, inform Senior Field Engineer (SFE).
+ The Field Service Engineer retains ownership of the problem until it is resolved.
+ The Field Service Engineer must keep the customer, SFE, and Service Delivery Manager (SDM) informed on progress.
+ Keep management and commercial account managers fully aware of all developments in the installed base.
+ Keep customers fully satisfied by keeping them informed of activities when on site and/or working on their behalf whilst on site.
+ Report regularly to management in accordance with reporting guidelines/procedures.
+ Complete other assignments and projects as directed.
+ Follow the alert procedure for system down.
+ Attend technical and general skills development training courses as directed and keep abreast of developments/technical product information.
+ Work within the defined responsibilities as documented in GE Healthcare Spirit and Letter Commitment Form to ensure compliance.
+ Accurately complete and lodge all service documentation in a timely manner within company guidelines.
+ Ensure all company property (tools, test equipment, motor vehicle) is kept in optimum condition and test tools calibrated according to the schedule requirements.
+ Ensure that parts usage/ordering is optimized from both the companies and the customer's perspective.
**Quality Specific Goals:**
+ Be aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position.
+ Complete all planned Quality & Compliance training within the defined deadlines.
+ Identify and report any and all customer quality or compliance concerns immediately to the Quality Organization.
+ Identify and report any personal quality or compliance concerns immediately to the Quality Organization.
+ Ensure timely job dispatch closure and send customer reports as required by company guidelines.
+ Ensure completion of all field modifications instructions (FMI's) within prescribed timeframe.
+ Participate in continuous improvement activities by identifying and appropriately escalating process and product quality gaps, providing solutions when possible.
**Qualifications & Requirements**
+ Technical capability and willingness to work on GE HealthCare medical imaging/medical diagnostic products.
+ Knowledge and prior experience working on cyclotron is highly desirable
+ Knowledge and experience working in CT, PET, Nuclear Medicine or Xray would be desirable
+ Electronic/ Electrical Engineering, Electronics Technician or equivalent electrical trade
+ Relevant licenses as required by Federal or State Legislation (eg: Electrical/Radiation Licenses), Work Cards (eg: White Card) and Australian Drivers licence (Class C minimum)
+ The role will have a strong focus on medical IT systems. Skills in TCP/IP, WIFI and medical networks is preferred.
**Vaccine for Preventable Diseases**
+ Depending on location, some states have mandated or are intending to mandate that contractors who enter healthcare sites must be able to provide evidence of vaccination for vaccine preventable diseases (VPDs) prior to working at their premises.
+ GE Healthcare does have an EHS Medical Services Program. We have an immunisation and vaccination program covering any GE Healthcare employee who is required to enter a site and conduct work where there is the likelihood of potential exposure or acquisition through respiratory means to VPDs.
+ To ensure your risk is minimised, you may be required to provide evidence of immunity /vaccination prior to commencing with GE Healthcare in such locations where it has been mandated. Equally you may be required to provide evidence of vaccination post-employment, in the event that further sites mandate this requirement.
+ You may be required to provide evidence for current COVID-19 vaccination status and other VPD's as required
**Desired Characteristics**
+ Experience working with electronic systems in the medical industry
+ Ability to work in a hospital/clinical environment
+ Ability to learn new technologies quickly and a willingness and commitment to continuous learning/improvement and extension of skills across all modalities.
+ Previous experience interpreting schematic diagrams and following technical reference manuals to perform effective repair and planned maintenance of electronic and electro-mechanical equipment.
+ Strong commitment and experience working within strict workplace safety standards and guidelines.
+ Solid fault-finding and problem-solving techniques.
+ Demonstrated ability/experience working on various computer networking systems.
+ Ability to plan and organize work requirements effectively using proven personal time management, planning, reasoning and prioritizing skills.
+ Strong and demonstrable interpersonal skills / customer relationship management abilities.
+ Strong ability to communicate often complex technical issues to the customer in an "easy to understand" manner.
+ Demonstrated ability to work effectively in a team environment and experience working with both internal and external customers to achieve solution focused service outcomes.
+ High work standards, quality, strong work ethic.
+ Ability to travel is essential for business or training purposes.
+ Occasional (but infrequent) travel interstate and/or overseas may be required
+ Working overtime as required
**Additional Information**
**Relocation Assistance Provided:** No

**At Stryker, we are seeking a dedicated and technically skilled Field Service Engineer to join our team, supporting customers across Perth and surrounding areas.**
**This role will have a large element of travel across WA - if you're someone who is keen to explore, this role could encompass jobs from Broome to Margaret River.**
**In this field-based role, you will be responsible for providing maintenance, repairs, and technical support for a range of medical devices and surgical equipment. You will play a crucial role in ensuring the reliability and performance of equipment that directly impacts patient care.**
This position offers autonomy, regular regional travel, and the opportunity to build strong relationships with clinical teams across both public and private healthcare settings.
**Key Responsibilities**
+ Perform preventative maintenance, repairs, and servicing of Stryker medical equipment at customer sites
+ Troubleshoot technical issues efficiently in high-pressure clinical environments
+ Build and maintain strong relationships with hospital staff as a trusted technical advisor
+ Manage your service schedule with minimal supervision, ensuring timely and effective customer support
+ Collaborate with colleagues to share technical knowledge and contribute to team goals
+ Accurately complete service documentation in accordance with company and regulatory standards
**Skills and Experience**
+ Minimum 2-3 years of technical experience in a relevant field (e.g. mechanical, electrical, electronics, engineering, trades)
+ Demonstrated hands-on repair and troubleshooting skills
+ Strong communication and interpersonal abilities, particularly in customer-facing environments
+ **Experience with fixing CT machines would be highly regarded**
+ Comfortable managing multiple tasks and working independently in a dynamic, fast-paced setting
+ Valid driver's licence and access to a personal vehicle
+ Willingness to travel regularly across the region
+ Desirable **:** Electrical licence and/or experience with test & tag equipment
**Why Join Stryker?**
At Stryker, we are proud to be recognised as one of the world's leading medical technology companies. Our mission to make healthcare better drives everything we do.
We offer:
+ Comprehensive onboarding and ongoing technical training
+ Competitive remuneration and incentive programs
+ Career growth opportunities within a global organisation
+ A supportive, inclusive team culture with strong leadership and shared purpose
**Apply Now**
If you are a skilled technician or engineer seeking a meaningful, hands-on role in the healthcare industry, we encourage you to apply. Join Stryker and play a vital role in supporting the delivery of exceptional patient care.
Stryker is a global leader in medical technologies and, together with its customers, is driven to make healthcare better. The company offers innovative products and services in MedSurg, Neurotechnology, Orthopaedics and Spine that help improve patient and healthcare outcomes. Alongside its customers around the world, Stryker impacts more than 150 million patients annually.
Stryker Corporation is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status. Stryker is an EO employer - M/F/Veteran/Disability.

**At Stryker, we are seeking a dedicated and technically skilled Field Service Engineer to join our team, supporting customers across Brisbane, the Gold Coast, and surrounding areas.**
**In this field-based role, you will be responsible for providing maintenance, repairs, and technical support for a range of medical devices and surgical equipment. You will play a crucial role in ensuring the reliability and performance of equipment that directly impacts patient care.**
This position offers autonomy, regular regional travel, and the opportunity to build strong relationships with clinical teams across both public and private healthcare settings.
**Key Responsibilities**
+ Perform preventative maintenance, repairs, and servicing of Stryker medical equipment at customer sites
+ Troubleshoot technical issues efficiently in high-pressure clinical environments
+ Build and maintain strong relationships with hospital staff as a trusted technical advisor
+ Manage your service schedule with minimal supervision, ensuring timely and effective customer support
+ Collaborate with colleagues to share technical knowledge and contribute to team goals
+ Accurately complete service documentation in accordance with company and regulatory standards
**Skills and Experience**
+ Minimum 2-3 years of technical experience in a relevant field (e.g. mechanical, electrical, electronics, engineering, trades)
+ Demonstrated hands-on repair and troubleshooting skills
+ Strong communication and interpersonal abilities, particularly in customer-facing environments
+ **Experience with fixing CT machines would be highly regarded**
+ Comfortable managing multiple tasks and working independently in a dynamic, fast-paced setting
+ Valid driver's licence and access to a personal vehicle
+ Willingness to travel regularly across the region
+ Desirable **:** Electrical licence and/or experience with test & tag equipment
**Why Join Stryker?**
At Stryker, we are proud to be recognised as one of the world's leading medical technology companies. Our mission to make healthcare better drives everything we do.
**We offer:**
+ Comprehensive onboarding and ongoing technical training
+ Competitive remuneration and incentive programs
+ Career growth opportunities within a global organisation
+ A supportive, inclusive team culture with strong leadership and shared purpose
**Apply Now**
If you are a skilled technician or engineer seeking a meaningful, hands-on role in the healthcare industry, we encourage you to apply. Join Stryker and play a vital role in supporting the delivery of exceptional patient care.
Stryker is a global leader in medical technologies and, together with its customers, is driven to make healthcare better. The company offers innovative products and services in MedSurg, Neurotechnology, Orthopaedics and Spine that help improve patient and healthcare outcomes. Alongside its customers around the world, Stryker impacts more than 150 million patients annually.
Stryker Corporation is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status. Stryker is an EO employer - M/F/Veteran/Disability.

**At Stryker, we are seeking a dedicated and technically skilled Field Service Engineer to join our team, supporting customers across Brisbane, the Gold Coast, and surrounding areas.**
**In this field-based role, you will be responsible for providing maintenance, repairs, and technical support for a range of medical devices and surgical equipment. You will play a crucial role in ensuring the reliability and performance of equipment that directly impacts patient care.**
This position offers autonomy, regular regional travel, and the opportunity to build strong relationships with clinical teams across both public and private healthcare settings.
**Key Responsibilities**
+ Perform preventative maintenance, repairs, and servicing of Stryker medical equipment at customer sites
+ Troubleshoot technical issues efficiently in high-pressure clinical environments
+ Build and maintain strong relationships with hospital staff as a trusted technical advisor
+ Manage your service schedule with minimal supervision, ensuring timely and effective customer support
+ Collaborate with colleagues to share technical knowledge and contribute to team goals
+ Accurately complete service documentation in accordance with company and regulatory standards
**Skills and Experience**
+ Minimum 2-3 years of technical experience in a relevant field (e.g. mechanical, electrical, electronics, engineering, trades)
+ Demonstrated hands-on repair and troubleshooting skills
+ Strong communication and interpersonal abilities, particularly in customer-facing environments
+ **Experience with fixing CT machines would be highly regarded**
+ Comfortable managing multiple tasks and working independently in a dynamic, fast-paced setting
+ Valid driver's licence and access to a personal vehicle
+ Willingness to travel regularly across the region
+ Desirable **:** Electrical licence and/or experience with test & tag equipment
**Why Join Stryker?**
At Stryker, we are proud to be recognised as one of the world's leading medical technology companies. Our mission to make healthcare better drives everything we do.
**We offer:**
+ Comprehensive onboarding and ongoing technical training
+ Competitive remuneration and incentive programs
+ Career growth opportunities within a global organisation
+ A supportive, inclusive team culture with strong leadership and shared purpose
**Apply Now**
If you are a skilled technician or engineer seeking a meaningful, hands-on role in the healthcare industry, we encourage you to apply. Join Stryker and play a vital role in supporting the delivery of exceptional patient care.
Stryker is a global leader in medical technologies and, together with its customers, is driven to make healthcare better. The company offers innovative products and services in MedSurg, Neurotechnology, Orthopaedics and Spine that help improve patient and healthcare outcomes. Alongside its customers around the world, Stryker impacts more than 150 million patients annually.
Stryker Corporation is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status. Stryker is an EO employer - M/F/Veteran/Disability.

**Job Description Summary**
As a Field Service Engineer for GE Healthcare you will be responsible for developing and maintaining strong relationships with both internal and external customers. You will drive customer satisfaction through service excellence, installing, maintaining and repairing electronic equipment in the Ultrasound and Patient Care Solutions modalities.
GE Healthcare is a leading global medical technology and digital solutions innovator. Our mission is to improve lives in the moments that matter. Unlock your ambition, turn ideas into world-changing realities, and join an organization where every voice makes a difference, and every difference builds a healthier world.
**Job Description**
**Essential Responsibilities**
+ Install equipment in a high quality, professional manner with strong attention to detail in accordance with the company standards, compliance standards and customer requirements.
+ Perform preventative maintenance in accordance with company standards, compliance standards and customer requirements.
+ Make corrective repair calls in a timely manner, aligned with customer contract requirements and repair the equipment in accordance with company standards and directives and customer requirements.
+ Ensure timely completion of Field Modification Instructions (FMI's).
+ Advise management when response time objectives cannot be met i.e. If there are two site visits in relation to the same problem, inform Senior Field Engineer (SFE).
+ The Field Service Engineer retains ownership of the problem until it is resolved.
+ The Field Service Engineer must keep the customer, SFE, and service delivery manager (SDM) informed on progress.
+ Keep management and commercial account managers fully aware of all developments in the installed base.
+ Manage time appropriately based on job urgency, part availability, and customer expectations.
+ Continuous learning mindset with the goal of proficiency in multiple modalities.
**About You**
Your communication skills will be pivotal to your success, as will your problem-solving ability. You will be proud to represent GE Healthcare and be passionate about customer care. You have a natural curiosity and every interaction you have is to "seek to understand".
You want to know the why, and do this without judgement and keeping an open mind. We will expect you to embody our Leadership Behaviours: to act with humility and build trust; lead with transparency; deliver with focus, and drive ownership - always with unyielding integrity.You will be mentored and supported as you navigate your new role in GE Healthcare, however it is critical that you are a "self-starter" and can take initiative. Sometimes you just have to figure things out and not be afraid to ask questions until you get to the right person or answer! Building trust early will be essential and you will do this with your self-discipline around following up, executing on tasks, and doing what you say you will do.
**Qualifications and Experience**
+ Electronic/ Electrical Engineering, Electronics Technician or equivalent electrical trade
+ Experience working on Ultrasound and LCS Medical Equipment is preferred
+ The role will have a strong focus on medical IT systems. Skills in TCP/IP, WIFI and medical networks is preferred.
+ Excellent verbal and written communication skills in local language as well as good command of English
+ Ability to synthesize complex issues and communicate in simple messages
+ Solid problem-solving skills (ability to manage and resolve conflict, communicate issues, and propose solutions to both internal team members and external customers)
+ Excellent organizational and time management skills
+ The ability to travel across the Pacific Islands and NZ if required
+ Compliance with vaccination mandates is mandatory
+ A valid drivers license is a must
Our total rewards are designed to unlock your ambition by giving you the boost and flexibility you need to turn your ideas into world-changing realities. Our salary and benefits are everything you'd expect from an organization with global strength and scale, and you'll be surrounded by career opportunities in a culture that fosters care, collaboration and support.
+ Flexible working options and flexible hours
+ Competitive salary
+ 5 weeks leave (ask about "take 5")
+ Generous leave & family policies
+ Long term career opportunities (locally and globally)
+ Generous discounts for goods & services via our employee benefits program (think travel, entertainment & shopping!) *This was recently rated as one of our employees favourite benefits!
**Women and indigenous candidates are strongly encouraged to apply. Please notethat to be considered for this position you must have unrestricted working rightsfor Australia and be prepared to undergo a background check which includes a police check. All GE HealthCare employees are required to be fully vaccinated for Covid-19.**
#LI-BA1
#LI-ONSITE
#LI-HYBRID
**Additional Information**
**Relocation Assistance Provided:** No

Field Service Engineer
Queensland, Australia
+ **Leading global medical technology company focused on improving women's health**
+ **Generous Base Salary + Car Allowance + Super**
Hologic is an innovative medical technology company primarily focused on improving Women's Health and well-being through early detection and treatment. We develop, manufacture and supply life-changing Diagnostics, GYN Surgical and Breast & Skeletal Solutions products that are founded on science and driven by technology; allowing healthcare professionals to diagnose and proactively treat patients with growing certainty, precision, and greater peace of mind.
As a Field Service Engineer with Hologic, you can expect to discover a career with real meaning. One that offers the opportunity to showcase your talents, achieve measurable success and gain immense satisfaction by enabling healthier lives everywhere, every day.
This is a pivotal role in the medical devices space, where you will be based on the road, providing exceptional support to our customers by installing, maintaining, and repairing various types of Hologic medical equipment. You will apply your knowledge of engineering principles to effectively troubleshoot and maintain systems where you will develop a well-rounded technical and interpersonal skillset.
You will be joining a high performing team who are passionate about making a difference in improving women's healthcare. A diverse and multi-disciplinary team who push the boundaries of business innovation. And a company which places emphasis on workplace culture, recognition and supporting employee's personal wellbeing.
We are looking for a highly motivated and ambitious person who is ready to make a positive impact to women's healthcare. You are committed to learning and continually stepping out of your comfort zone. With a Bachelor's degree or other tertiary qualification, ideally in an engineering related discipline, you will possess strong analytical ability and have interest in helping people and finding solutions to problems. This is an ideal role for someone with 2+ years experience working as an engineer in the life sciences industry. You are a team player and great communicator, being able to effectively voice and deliver your ideas to internal and external stakeholders.
You have a willingness to work flexible hours and overtime at short notice, understanding that our role is critical to the health and wellbeing of others.
As part of this role, you will be required to hold a valid Australian driver license, a reliable car and flexibility/ability to travel within the assigned territory (with some overnight stays required). The position requires around 40% regional/interstate travel.
If you have the right skills and experience and want to join our team, apply today!
We make hiring decisions based on your experience, skills and passion. Please note that interviews may be conducted virtually. When you apply, please tell us the pronouns you use and any reasonable adjustments you may need during the interview process.
#LI-TL1