21 Senior Mechanic jobs in Australia

**PURPOSE AND SCOPE**
As the Refrigeration Mechanic/HVAC Technician you will perform maintenance and repair to equipment associated with the HVAC infrastructure at OASIS. This includes, but is not limited to, maintenance of large chillers, DX refrigeration equipment, chilled water-cooling systems, residential air conditioning systems and the air conditioning systems of its vehicle fleet. Scope of work will range from minor and major repairs, servicing and where necessary replacement of equipment.
**_Applicants must be an USA citizen who have a TS/SCI or Australian Citizen who can obtain the appropriate level of security clearance._**
**Responsibilities/Duties**
1. Performing maintenance tasks as required. Scheduled or repairs.
2. Performing tasks for project type work as required on an ad hoc basis.
3. Planning of tools, equipment, assistance and materials needed to complete tasks.
4. Liaising with others to notify and organize tasks to be undertaken as required.
5. Ensuring as much as is possible that equipment is maintained to operate in a safe manner.
6. Reporting any incidents via chain of command to Management as a priority
7. Use of computer systems to record and plan work tasks.
8. Assisting in all areas of Facilities Maintenance from as required. Not limited to HV switching, cleaning of mechanical spaces and shops.
9. Ensure compliance with all site's environmental health and safety requirements.
10. All other reasonable duties as requested.
**Essential**
+ Understanding of technical environment and terminology.
+ Knowledge of correct storage, handling and disposal procedures for refrigerants.
+ Trade certificate or license.
+ Demonstrated Understanding of development of process and procedures.
+ Ability to drive a positive culture.
+ Strong communication skills.
+ Current Drivers License.
**PHYSICAL REQUIREMENTS**
Personnel are required to be medically fit to work and safely complete all physical tasks associated with the role in which they are employed. While this role is predominantly sedentary in nature, personnel must remain able to safely access associated areas and perform required actions without undue impacts to individual health and wellbeing.
**SECURITY CLEARANCE REQUIREMENT**
It is a condition of employment at JDFPG that employees obtain and retain the appropriate level of security clearance and medical clearance applicable to each role. The employee will be required to obtain and maintain a TSPV Department of Defense Security Clearance (Australian) or TS/SCI (U.S.) clearance.
**STATEMENT OF WORK REQUIREMENTS**
All personnel assigned to work at JDFPG shall be:
+ At least 18 years of age.
+ Able to fluently read, write and speak English.
**EHS REQUIREMENT**
All OASIS personnel are responsible for understanding and complying with all site environmental, health and safety requirements. While OASIS is responsible for providing a safe workplace and is responsible for ensuring compliance with requirements of the JDFPG Handbook, each person is responsible for:
+ Completing work task in a safe manner.
+ Reporting any unsafe acts or conditions to their supervisor and/or OASIS PMO/EHS Manager.
+ Continuous adherence to the environmental, health and safety procedures outlined in the JDFPG Handbook during the performance of their work.
+ Red-Carding a Job - Employee right and responsibility to "STOP WORK" if a job is unsafe or possess a danger to the environment.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters ( .

Title:
Vehicle Mechanic
Belong. Connect. Grow. with KBR!
KBR's National Security Solutions team provides high-end engineering and advanced technology solutions to our customers in the intelligence and national security communities. In this position, your work will have a profound impact on the country's most critical role - protecting our national security.
Why Join Us?
+ Innovative Projects: KBR's work is at the forefront of engineering, logistics, operations, science, program management, mission IT and cybersecurity solutions.
+ Collaborative Environment: Be part of a dynamic team that thrives on collaboration and innovation, fostering a supportive and intellectually stimulating workplace.
+ Impactful Work: Your contributions will be pivotal in designing and optimizing defense systems that ensure national security and shape the future of space defense.
Who You AreYou're a skilled Vehicle Mechanic with a strong background in diagnosing, repairing, and maintaining a wide range of vehicles to ensure they operate at peak performance. With expertise in engine systems, electrical components, hydraulics, and more, you're committed to safety, reliability, and efficiency in every repair. Your hands-on experience and problem-solving abilities ensure that vehicles remain ready for critical missions and operations.
At KBR, you bring attention to detail, technical proficiency, and a dedication to high standards. Known for your thoroughness and ability to work under pressure, you effectively troubleshoot issues, perform preventive maintenance, and collaborate with a team to support mission success. Your commitment to excellence aligns with KBR's mission of operational readiness and reliable support for essential functions.
This is a contingent position based upon contract award
What You'll DoIn the role of Vehicle Mechanic, your duties will include:
+ Using manual and computerized diagnostic methods to identify potential problems in a vehicle.
+ Explaining mechanical problems and possible solutions to customers.
+ Planning work and testing procedures using charts, experience and other organizational methods.
+ Testing parts and systems to ensure they work correctly.
+ Ensuring all critical parts are checked and tested.
+ Performing basic automotive care, including changing oil and rotating tires.
+ Repairing or replacing worn, old or defective parts of a vehicle.
Requirements:
+ Must have a US Secret or AUS NV-1 Clearance.
+ Must be a US or Australian certified vehicle mechanic.
+ Must have a minimum of five years of experience in vehicle maintenance.
+ Requires a high school diploma, and further specialized training in automotive service technology.
+ Though not necessary, an associate degree with classes in math, electronics or auto repair is desired.
This role will be located in Alice Springs, at a 4,400-acre facility with approximately 687,000 square feet of mission and support space. This position is expected to be onsite 100%.
#SF
Belong, Connect and Grow at KBRAt KBR, we are passionate about our people and our Zero Harm culture. These inform all that we do and are at the heart of our commitment to, and ongoing journey toward being a People First company. That commitment is central to our team of team's philosophy and fosters an environment where everyone can Belong, Connect and Grow. We Deliver - Together.
KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

**About GE Vernova**
GE Vernova is a planned, purpose-built global energy company that includes Power, Wind, and Electrification businesses and is supported by its accelerator businesses of Advanced Research, Consulting Services, and Financial Services. Building on over 130 years of experience tackling the world's challenges, GE Vernova is uniquely positioned to help lead the energy transition by continuing to electrify the world while simultaneously working to decarbonize it. GE Vernova helps customers power economies and deliver electricity that is vital to health, safety, security, and improved quality of life. GE Vernova is headquartered in Cambridge, Massachusetts, U.S., with more than 80,000 employees across 100+ countries around the world.
GE Vernova's **Gas Power** business engineers advanced, efficient natural gas-powered technologies and services, along with decarbonization solutions that aim to help electrify a lower carbon future. As part of the Gas Power One Field Services team, **FieldCore** installs, maintains and upgrades power generation equipment, enabling operators of the world's energy infrastructure to provide more reliable and affordable energy.
**Job Summary:**
The primary responsibility of the Mechanic - Steam and Gas - is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization's core values.
**Essential Duties & Responsibilities:**
+ Read blueprints, schematic drawings and technical documentation to determine proper work procedures.
+ Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments.
+ Dismantle and assemble machinery and equipment using a variety of hand, power, pneumatic and hydraulic tools.
+ Perform mechanical and electrical maintenance and repairs on power tools, hand tools and training equipment.
+ Move machinery and equipment using hoists, cranes, chain falls and trucks.
+ Align machinery and equipment using hoists, squares, rules, micrometers, plumb bobs, dial indicators and/or laser alignment equipment.
+ Perform machining and welding operations for making various parts for lab and shop training equipment
+ Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches.
+ Responsible for shipping and receiving all major pieces for T&DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies
+ Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects.
+ Load, transport, and unload materials, tools, equipment and supplies.
+ Availability to travel and be away from home for extended periods of time
+ Ability and willingness to work holidays, weekends and overtime as required by field assignments - Field
**Required Qualifications & Experience** :
+ Degree or associate degree in Technical Field, Gas Turbine Systems Technician preferred
+ Must have a minimum of two (2) years' experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines.
+ Must have experience performing equipment alignments using either laser or traditional methods.
+ Must have Driver's License
+ Must possess minimum required hand tools.
**Desired Characteristics:**
+ Qualified level. Able to successfully perform all requirements of the job properly.
+ Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.
+ Has solid skills acquired with trainings and required to disassemble and reassemble complex rotating equipment - Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator
+ Good mechanical/technical skills.
+ Good oral communication skills and critical thinking ability.
+ May be required to handle time-sensitive tasks and maintain a schedule within operationally challenging environments.
+ Must work well both independently and in a team environment.
_FieldCore is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, gender identity, or any other characteristic protected by law_

**About GE Vernova**
GE Vernova is a planned, purpose-built global energy company that includes Power, Wind, and Electrification businesses and is supported by its accelerator businesses of Advanced Research, Consulting Services, and Financial Services. Building on over 130 years of experience tackling the world's challenges, GE Vernova is uniquely positioned to help lead the energy transition by continuing to electrify the world while simultaneously working to decarbonize it. GE Vernova helps customers power economies and deliver electricity that is vital to health, safety, security, and improved quality of life. GE Vernova is headquartered in Cambridge, Massachusetts, U.S., with more than 80,000 employees across 100+ countries around the world.
GE Vernova's **Gas Power** business engineers advanced, efficient natural gas-powered technologies and services, along with decarbonization solutions that aim to help electrify a lower carbon future. As part of the Gas Power One Field Services team, **FieldCore** installs, maintains and upgrades power generation equipment, enabling operators of the world's energy infrastructure to provide more reliable and affordable energy.
**Job Summary:**
The primary responsibility of the Mechanic - Steam and Gas - is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization's core values.
**Essential Duties & Responsibilities:**
+ Read blueprints, schematic drawings and technical documentation to determine proper work procedures.
+ Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments.
+ Dismantle and assemble machinery and equipment using a variety of hand, power, pneumatic and hydraulic tools.
+ Perform mechanical and electrical maintenance and repairs on power tools, hand tools and training equipment.
+ Move machinery and equipment using hoists, cranes, chain falls and trucks.
+ Align machinery and equipment using hoists, squares, rules, micrometers, plumb bobs, dial indicators and/or laser alignment equipment.
+ Perform machining and welding operations for making various parts for lab and shop training equipment
+ Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches.
+ Responsible for shipping and receiving all major pieces for T&DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies
+ Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects.
+ Load, transport, and unload materials, tools, equipment and supplies.
+ Availability to travel and be away from home for extended periods of time
+ Ability and willingness to work holidays, weekends and overtime as required by field assignments - Field
**Required Qualifications & Experience** :
+ Degree or associate degree in Technical Field, Gas Turbine Systems Technician preferred
+ Must have a minimum of two (2) years' experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines.
+ Must have experience performing equipment alignments using either laser or traditional methods.
+ Must have Driver's License
+ Must possess minimum required hand tools.
**Desired Characteristics:**
+ Qualified level. Able to successfully perform all requirements of the job properly.
+ Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.
+ Has solid skills acquired with trainings and required to disassemble and reassemble complex rotating equipment - Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator
+ Good mechanical/technical skills.
+ Good oral communication skills and critical thinking ability.
+ May be required to handle time-sensitive tasks and maintain a schedule within operationally challenging environments.
+ Must work well both independently and in a team environment.
_FieldCore is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, gender identity, or any other characteristic protected by law_

**About GE Vernova**
GE Vernova is a planned, purpose-built global energy company that includes Power, Wind, and Electrification businesses and is supported by its accelerator businesses of Advanced Research, Consulting Services, and Financial Services. Building on over 130 years of experience tackling the world's challenges, GE Vernova is uniquely positioned to help lead the energy transition by continuing to electrify the world while simultaneously working to decarbonize it. GE Vernova helps customers power economies and deliver electricity that is vital to health, safety, security, and improved quality of life. GE Vernova is headquartered in Cambridge, Massachusetts, U.S., with more than 80,000 employees across 100+ countries around the world.
GE Vernova's **Gas Power** business engineers advanced, efficient natural gas-powered technologies and services, along with decarbonization solutions that aim to help electrify a lower carbon future. As part of the Gas Power One Field Services team, **FieldCore** installs, maintains and upgrades power generation equipment, enabling operators of the world's energy infrastructure to provide more reliable and affordable energy.
**Job Summary:**
The primary responsibility of the Steam/Gas Mechanic is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization's core values.
**Essential Duties & Responsibilities:**
+ Dismantle, assemble, move and align, machinery and equipment using: hoists, cranes, chain falls, hand tools, power tools, pneumatic and hydraulic tools, micrometers, rules, squares, plumb bobs, dial indicators and/or laser alignment equipment
+ Read blueprints, schematic drawings and technical documentation to determine proper work procedures
+ Responsible for shipping and receiving all major pieces for T&DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies
+ Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches
+ Perform machining and welding operations for making various parts for lab and shop training equipment
+ Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects
+ Load, transport, and unload materials, tools, equipment and supplies and perform mechanical and electrical maintenance and repairs as needed
+ Read blueprints, schematic drawings and technical documentation to determine proper work procedures
+ Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments
+ Ability and willingness to work holidays, weekends and overtime as required by field assignments.
**Required Qualifications & Experience** :
+ Minimum of one (1) years' experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines
+ Valid Driver's License
+ Preferred: Degree/Associate Degree in Technical Field or Gas Turbine Systems
**Desired Characteristics:**
+ Ability to disassemble and reassemble complex rotating equipment - Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator
+ Proficient in the following: mechanical/technical skills, oral communications skills, Critical Thinking
+ Manage time-sensitive tasks and maintain a schedule within operationally challenging environments.
+ Must work well both independently and in a team environment.
_FieldCore is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, gender identity, or any other characteristic protected by law_

**About GE Vernova**
GE Vernova is a planned, purpose-built global energy company that includes Power, Wind, and Electrification businesses and is supported by its accelerator businesses of Advanced Research, Consulting Services, and Financial Services. Building on over 130 years of experience tackling the world's challenges, GE Vernova is uniquely positioned to help lead the energy transition by continuing to electrify the world while simultaneously working to decarbonize it. GE Vernova helps customers power economies and deliver electricity that is vital to health, safety, security, and improved quality of life. GE Vernova is headquartered in Cambridge, Massachusetts, U.S., with more than 80,000 employees across 100+ countries around the world.
GE Vernova's **Gas Power** business engineers advanced, efficient natural gas-powered technologies and services, along with decarbonization solutions that aim to help electrify a lower carbon future. As part of the Gas Power One Field Services team, **FieldCore** installs, maintains and upgrades power generation equipment, enabling operators of the world's energy infrastructure to provide more reliable and affordable energy.
**Job Summary:**
The primary responsibility of the Steam/Gas Mechanic is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization's core values.
**Essential Duties & Responsibilities:**
+ Dismantle, assemble, move and align, machinery and equipment using: hoists, cranes, chain falls, hand tools, power tools, pneumatic and hydraulic tools, micrometers, rules, squares, plumb bobs, dial indicators and/or laser alignment equipment
+ Read blueprints, schematic drawings and technical documentation to determine proper work procedures
+ Responsible for shipping and receiving all major pieces for T&DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies
+ Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches
+ Perform machining and welding operations for making various parts for lab and shop training equipment
+ Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects
+ Load, transport, and unload materials, tools, equipment and supplies and perform mechanical and electrical maintenance and repairs as needed
+ Read blueprints, schematic drawings and technical documentation to determine proper work procedures
+ Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments
+ Ability and willingness to work holidays, weekends and overtime as required by field assignments.
**Required Qualifications & Experience** :
+ Minimum of one (1) years' experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines
+ Valid Driver's License
+ Preferred: Degree/Associate Degree in Technical Field or Gas Turbine Systems
**Desired Characteristics:**
+ Ability to disassemble and reassemble complex rotating equipment - Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator
+ Proficient in the following: mechanical/technical skills, oral communications skills, Critical Thinking
+ Manage time-sensitive tasks and maintain a schedule within operationally challenging environments.
+ Must work well both independently and in a team environment.
_FieldCore is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, gender identity, or any other characteristic protected by law_

Global Vision Recruitment on behalf of SP Mechanical Pty Ltd T/A Rods Mechanical Repairs
br>Position: Motor Mechanic
Salary: $75,000 – $80,000 per annum plus 12% superannuation < r>Mode: Full-time
Hour: 38
Location: 4/45 Fourth Ave Blacktown, NSW 2148
Experience required: Minimum 2 years of relevant experience

We are giving you an exciting opportunity to join the elite team based in Blacktown, NSW. We are looking for a team member to join our friendly Motor Mechanics who are proud and passionate about cars.

The candidate in mind will be expected to perform the following duties that include but are not limited to:
• Repair, maintain and test motor vehicle and other internal combustion engines and related mechanical components. < r>• etecting and diagnosing mechanical and electrical faults in engines and parts. < r>• D smantling and removing engine assemblies, transmissions, steering mechanisms, and other components, and checking parts. < r>• R pairing and replacing worn and defective parts and reassembling mechanical components and referring to service manuals as needed. < r>• P rforming scheduled maintenance services, such as oil changes, lubrications, and engine tune-ups, to achieve smoother running of vehicles and ensure compliance with pollution regulations. < r>• R assembling engines and parts after being repaired. < r>• T sting and adjusting mechanical parts after being repaired for proper performance. < r>• D agnosing and testing parts with the assistance of computers. < r>• M y inspect vehicles and issue detail work required to achieve roadworthiness. < r>• M y respond to vehicle breakdown service calls. < r>
Qualifications:
• C rtificate III, IV and Diploma in Automotive with on-the-job experience. < r>
Other Skills and Requirements:
• M nimum 2 years plus experience in a similar role. < r>• S lf-starter with strong self-management skills. < r>• S rong team player with ability to communicate directly with peers, managers, and clients. < r>• E cellent attention to detail. < r>• C mpetency in all the duties listed above.

Global Vision Recruitment on behalf of Adinath Cars Pty Ltd
br>Position: Motor Mechanic
Salary: $70,000 – $80,000 per annum plus 12% superannuation < r>Mode: Full-time
Hour: 38
Location: 225 Richmond Road, Richmond SA 5033
Experience required: Minimum 1 year of relevant experience

Adinath Cars Pty Ltd is a car repairer business and we are giving you an exciting opportunity to join the elite team of Motor Mechanics based in Richmond, SA. We are looking for a team member to join our friendly Motor Mechanics who are proud and passionate about cars.

The candidate in mind will be expected to perform the following duties that include but are not limited to:
• Diagnose and repair mechanical and electrical components of various vehicles, including engines, transmissions, brakes, and electrical systems. < r>• tilize diagnostic tools and equipment to assess vehicle performance and troubleshoot faults. Perform routine services such as oil changes, brake inspections, engine tune-ups, and fluid checks to maintain optimal vehicle performance < r>• C mmunicate with customers to explain repair needs, provide service recommendations, and ensure customer satisfaction. < r>• C llaborate with team members in the workforce to ensure efficient workflow and service delivery. Manage time effectively to complete repair and maintenance tasks within deadlines < r>• M intain organized records of services performed and parts used. < r>
Qualifications:
• C rtificate III in Light Vehicle Mechanical Technology, Certificate IV in Automotive Mechanical Diagnosis or Diploma of Automotive Technology < r>
Other Skills and Requirements:
Automotive mechanic has several key skills which are essential.
• M nimum 1 year of relevant experience < r>• P oficiency in diagnosing and repairing various vehicle systems, including engines, transmissions, brakes, and electrical systems, is crucial < r>• A tention to detail is important for noticing small issues that may indicate larger problems, ensuring thorough inspections and repairs < r>• P oblem-solving skills are necessary for troubleshooting and resolving complex mechanical issues efficiently. Additionally, manual dexterity is vital for precise work on small and intricate components. < r>• F miliarity with a variety of automotive tools and diagnostic equipment, including scanners and lifts, is also essential < r>• n understanding of the latest advancements in automotive technology, such as hybrid and electric vehicles, helps mechanics stay current in the field. < r>• C stomer service skills enable effective communication with customers, allowing mechanics to explain repairs and recommendations clearly. < r>• T me management is important for completing repairs and maintenance within set deadlines, while safety awareness ensures adherence to safety procedures and regulations in the workplace. < r>• F nally, the ability to work collaboratively with other mechanics and staff in a shop setting enhances overall efficiency and effectiveness.

Motor Mechanic
We are Mansys Pty Ltd, recruitment consultants. Our client, Ace Driver Training SA Pty Ltd, based out of Hume, ACT is actively looking for a Motor Mechanic to join its team on a full-time basis. The business is an automotive repair shop that provides repairs and maintenance services to light weight vehicles. br>Main Responsibilities of the role are-
• Diagnose vehicle issues through visual inspection and computerized diagnostic tools. < r>• epair or replace damaged or worn-out parts, including engine parts, brakes, and suspension components. < r>• D agnose and repair transmission issues, improving vehicle functionality and longevity for customers. < r>• D sassemble, clean, and reassemble mechanical components to enhance vehicle safety and reliability. < r>• C nsistently adhere to safety regulations, ensuring a secure work environment for both staff and clients. < r>• M intain accurate service records and report findings to customers and management. < r>• P rform routine and preventive maintenance, including fluid changes and inspection of mechanical features, including gear ratios, on a variety of vehicle types. < r>• M intain current knowledge through ongoing education and specialized training. < r>• I stall new or rebuilt transmission into vehicles, ensuring correct calibration and optimal performance. < r>
Must Have — < r>• Cer ificate III in Light Vehicle Mechanical Technology < r>• R levant Diploma in Automobile Engineering will be given high weightage < r>• A least 2 years of Australian experience in same occupation < r>
Skills Needed
• E cellent problem-solving and diagnostic abilities. < r>• A tention to detail with a focus on quality workmanship. < r>• G od communication skills for effectively explaining technical issues to non-technical customers. < r>• C pacity to work independently and in a team setting. < r>• S rong commitment to safety and customer service. < r>
Successful candidate will be on an annual salary of $75,000 to $90,000 Plus Superannuation.
Only shortlisted candidates will be contacted.